Install library

STEP1

Install Arduino IDE and start up the Arduino IDE

STEP2

Put this library in the following location:

STEP3

Restart the Arduino IDE software

STEP1:Install Arduino IDE and start up the Arduino IDE

https://www.arduino.cc

STEP2:Put this library in the following location:

MacOSX:
/Users/?user name?/Documents/Arduino/libraries/

Windows:
Documents/Documents/Arduino/libraries

# OR read this page # https://www.arduino.cc/en/Guide/Libraries

Please install the library in the location listed above only,
otherwise you may see the following warning message consisting of the following lines upon attempting to compile.
====
>Arduino: 1.6.8, Board:"Arduino/Genuino Uno"
>
>Multiple Libraries were found for "Kalman.h"
====

STEP3:Restart the Arduino IDE software

For each program that you upload onto the UnlimitedHand, you should first restart the Unlimitedhand by pressing and holding on its power switch.