Install the UnlimitedHand Library for Arduino



STEP 1. Install Arduino IDE and start up the Arduino IDE

https://www.arduino.cc

STEP 2. Put this library in the following location:

MacOSX:
/Users/?user name?/Documents/Arduino/libraries/
Windows:
Documents/Documents/Arduino/libraries
# OR read this page # https://www.arduino.cc/en/Guide/Libraries

Please install the library in the location listed above only,
otherwise you may see the following warning message consisting of the following lines upon attempting to compile.
====
>Arduino: 1.6.8, Board:"Arduino/Genuino Uno"
>
>Multiple Libraries were found for "Kalman.h"
====

STEP 3. Restart the Arduino IDE software

For each program that you upload onto the UnlimitedHand, you should first restart the Unlimitedhand by pressing and holding on its power switch.


Other Introductions

How to use at first with Arduino / Install the UnlimitedHand Library for Arduino / Uploading sample programs Arduino on to the device / Connecting to the device via Bluetooth / Strap the UnlimitedHand on your foream / Submit your topic on the UnlimitedHand forum

dev.unlimitedhand.com